Roof replacement, re-roofing and leak repair for Culver City homes: shingle, clay tile, standing seam metal and flat roofs. Licensed, insured and based minutes away on La Cienega Blvd, with the Culver City re-roof permit handled for you.

Most single-family roofs are torn off and replaced in 3–7 days, depending on size and material. Tile roofs and homes with multiple old layers take longer. Culver City requires a building permit for every re-roof, issued by the city's own Building Safety Division, not LADBS. Arterra Design & Build (CSLB #1114133, Owens Corning Preferred Contractor) pulls the permit and schedules the inspections.
Full tear-off, decking inspection, new underlayment, flashing and ventilation, then your new roof and a final walkthrough.
We find the actual source, often flashing, valleys or failed underlayment, and fix it instead of patching the symptom.
A free in-home inspection to tell you honestly whether a repair is enough or replacement makes more sense.
Cost-effective, Class A fire-rated options for ranch and post-war homes.
For Spanish-style homes, including underlayment replacement under existing or new tile.
Standing seam metal, and TPO or foam systems for flat and low-slope roofs on modern homes and additions.
Culver City's housing is a mix of 1920s–1940s Spanish-style and bungalow homes, post-war ranch houses and newer modern builds, so the roof type changes from street to street.
Every roof is priced after an inspection. As a starting range for Los Angeles homes:
Typically $10K–$20K for most single-family homes.
Typically $30K–$60K+, depending on material and roof complexity.
Price depends on size, pitch, existing layers, decking condition, material and access. If we find rotted decking, we photograph it and price it before doing any extra work. $0-down financing is available, subject to credit approval.
From our journal: Roof cost guide for Los Angeles · Roof repair vs. replacement · 7 warning signs before rain
Real roofing reviews from our clients. Some of them mention ALR Remodeling, our earlier company name.
“The roof needed more than just new panels. The rear slope had sagged from years of water pooling. We decided on metal roof replacement and had them reframe the rear section. After they removed the shingles, they rebuilt the slope to match the original pitch and added sheathing and waterproofing. Once the framing was fixed, they installed standing seam metal panels across the roof. Ridge caps, valleys, and drip edges were all upgraded. They also updated all flashing, including around the attic vents. It now looks sharp and feels much sturdier than before. It was done right.”
“I had a leak in my roof and decided to replace it before the winter will come. After reviewing couple of contractors I’ve made a decision to move forward with ALR. Thank you ALR remodeling for doing my roof! The crew is super nice and come on time like we agreed, the job was done right to my expectations.”
“I had multiple companies come out to quote out my roof replacement and after some consideration I decided to go with ALR Remodeling and I was so pleased I had them do my HVAC and attic insulation. Overall I had a great experience unlike some past remodeling I’ve done around the house so I would definitely recommend, 10/10.”
“I had been wanting to remodel my bathroom and roof for years, and finally, with a friend’s recommendation, I found this company. They did an amazing job on my bathroom with a walk-in shower and on my roof. Everything was super organized, and their customer service was excellent.”
“We interviewed several contractors and Tom and Levi were the ones that stood out from the rest. … We felt so comfortable with them that we used ALR Remodeling for our yard, stucco, and roof replacement! Our house is gorgeous because of them.”
“Levi and Tom from ALR did a fantastic job on our roof and turned our old landscaping looking brand new! Their work was top quality professional and done with great attention to detail.”
We inspect the roof and attic and tell you honestly: repair or replace.
A written, itemized estimate, then the Culver City re-roof permit.
Usually 3–7 days, with landscaping protected and daily cleanup.
City final inspection, a written workmanship warranty and manufacturer warranties.
Yes. Culver City requires a building permit for every re-roof, and for changing a flat roof to a sloped one. Permits come from Culver City's Building Safety Division, not LADBS. We pull the permit and schedule the inspections.
Most single-family roofs are torn off and replaced in 3–7 days, depending on size and material. Tile roofs and homes with multiple layers to remove take longer.
Asphalt shingle roofs typically run $10K–$20K, and tile, metal and premium roofs $30K–$60K+. The final price depends on size, pitch, layers, decking condition, material and access.
Often not. Clay tile can last for decades, while the underlayment under it wears out. In many cases we remove the tile, replace the underlayment and flashing, and reinstall the good tile.
We photograph it and price it before any extra work. No surprise change orders.
Yes. The work is outside, though tear-off is loud. We protect your landscaping and clean up every day.
A written workmanship warranty from Arterra plus the manufacturer's material warranty. We're licensed (CSLB #1114133) and carry $2M general liability insurance.
Book a free roof inspection. We'll tell you honestly whether a repair is enough or it's time to replace. Remodeling inside too? Every remodel starts with a designer meeting where you see your new space in 3D before construction begins.
We respond to every request within 2 business hours, Sunday through Friday · Sunday–Friday 8:30am–8pm · office@arterradb.comRemodeling inside too? See our Culver City remodeling services or roof leak repair in Westchester.
Copyrights © 2026. Arterra Design & Build. All Rights Reserved.